![background image](http://html1.mh-extra.com/html/fronius/vr-4040/vr-4040_operating-instructions-manual_2339460044.webp)
44
Inspection procedure
-
Wipe a light-coloured cleaning cloth across the piston rod (38) of the damper and the
bottom rod-end (39)
-
If there is oil on the cloth, change the damper
Brake block
Inspection interval
-
every 500,000 weld seams, at least once every 6 months
Inspection procedure
Take off the side guard panel
Using a feeler gauge, measure the clearance between the wear markers and the
brake wheel
If the clearance is less than 0.5 mm, change the brake block (see the section below:
“Changing the brake block”)
Re-mount the side guard panel (see: “Start-up”)
(39)
(38)
1
2
3
4
Summary of Contents for VR 4040
Page 2: ...2...
Page 4: ...4...
Page 34: ...34 More details on mounting the end of wire watchdog 2 mm...
Page 55: ...55 EN...