Fronius Primo GEN24 3.0, Operating Instructions Manual

Page: 127 / 192

Connection dia-
gram - 2 relay The ripple control signal receiver and the I/Os terminal of the inverter can be
connected to one another in accordance with the connection diagram.
If the distance between the inverter and the ripple control signal receiver ex-
ceeds 10 m, at least a CAT 5 cable is recommended and the shield must be con-
nected at one end to the push-in terminal of the data communication area
(SHIELD).
(2)
IO
4
V+ V+
IO
0
IO
2
IN
6
IN
8
IN
1
0
IN
1
1
IN
9
IN
7
IO
5
IO
3
IO
1
G
N
D
G
N
D
Relais 1
Relais 2
(1)
V+
IN8
IN9
Active Power
100 %
60 %
30 %
0 %
Relais 1
0
1
0
1
Relais 2
0
0
1
1
(1) Ripple control signal receiver with 2 relays, for effective power limiting.
(2) I/Os of the data communication area.
Use the preconfigured file for 2-relay mode:
1
Download the file (.fpc) under 2-relay mode onto the end device.
2
Upload the file (.fpc) in the "I/O Power Management" menu using the "Im-
port" button.
3
Click on the "Save" button.
The settings for 2-relay mode are stored.
127
EN