18
General
Device concept
The cold wire feeder is designed to be used
with wirespools of max. 300 mm (11.81 in)
diameter.
The wirespool holder is located inside the
cold wire feeder housing to protect it from
dirt.
The standard 4 roller drive has good wire
feeding properties. The cold wire feeder is
also suitable for long hosepacks and,
due to its compact size, can be used in
many different ways.
It is compatible with the following power
sources:
-
TransTig 2200 / 2500 / 3000 Job
-
TransTig 4000 / 5000 Job
-
MagicWave 2200 / 2500 / 3000 Job
-
MagicWave 4000 / 5000 Job
Application areas
The KD 7000 D-11 can be used for all types of TIG welding, and is especially suited to ro
-
bot applications and automated tasks.
The cold wire feeder is suitable for all standard shielding gases.
Warning notices
on the device
The wire-feed unit has safety symbols on the rating plate. The safety symbols must not be
removed or painted over. The symbols warn against operating the equipment incorrectly,
as this may result in serious injury and damage.
Summary of Contents for KD 7000 D-11
