Fronius FOH 10-76, Operating Instructions, Maintenance

Page: 62 / 94

62
Opening the
welding head
NOTE! The manufacturer shall not be liable for any damage that arises due
to improper handling. The following are suggestions that cannot be used as
the basis of any claims whatsoever for defects that arise subsequently.
1. Use an Allen key (4 mm) to
unscrew the retaining bolts of the
tool carrier.
2. Remove the tool carrier from the
head and set to one side.
3. Use an Allen key (2.5 mm) to
unscrew the Allen screws on the
cover of the head.
4. Remove the cover from the head
and set to one side.
5x
12x