
19
Safety
inspection
Disposal
Safety
labelling
Data protection
Copyright
- The manufacturer recommends that a safety inspection of the device is performed at
least once every 12 months.
- The manufacturer recommends that the power source be calibrated during the same
12-month period.
-
A safety inspection carried out by a qualified electrician is recommended
- after modification
- after installing or converting components
- after repairs, updates and maintenance
- at least every twelve months.
- For safety inspections, follow the appropriate national and international standards and
directives.
- Further details on safety inspection and calibration can be obtained from your service
centre. They will provide you on request with any documents you may require.
Do not dispose of this device with normal domestic waste! To comply with the European
Directive 2012/19/EC on Waste Electrical and Electronic Equipment and its implemen
-
tation as national law, electrical equipment that has reached the end of its life must be
collected separately and returned to an approved recycling facility. Be sure to return any
device that you no longer require to your dealer, or find out about the approved collection
and recycling facilities in your area. Ignoring this European Directive may be harmful to
the environment and your own health!
Devices with the CE mark satisfy the essential requirements of the low-voltage and elec
-
tromagnetic compatibility directive (e.g. relevant product standards from the EN 60 974
series).
Devices with the CSA test mark satisfy the requirements of the relevant standards in
Canada and the USA.
The user is responsible for backing up any changes made to the factory settings.
The manufacturer shall not be liable in the event that personal settings are deleted.
Copyright of these operating instructions remains with the manufacturer.
Text and illustrations were accurate at the time of printing.
Fronius reserves the right to make changes. The contents of the operating instructions
shall not provide the basis for any claims whatsoever on the part of the purchaser.
We are grateful for any suggestions for improvement and for drawing our attention
to any errors in these operating instructions.
Summary of Contents for FOH 10-76
