21
EN
Control elements and connections
Safety
Front
(1)
Coolant inspection window
(2)
Rating plate
(3)
Screw-cap and filler neck
(4)
Important notes on maintenance
and operation
(5)
Fuse for mains power supply
is tripped if the wrong mains voltage
has been set, or if overvoltage oc-
curs
(6)
Fuse for coolant pump
is tripped if the coolant pump is
overloaded or blocked
(7)
Connection jack for coolant watchdog
for signal evaluation by the robot control. The signal evaluation is carried out via
pins 3 and 4 of the connection socket.
(8)
Mains switch
(9)
Mains cable / mains cable lead-through
Rear
(10)
Coolant forward-flow connector
(blue)
(11)
Water filter
(12)
Coolant return-flow connector
(red)
WARNING!
Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
-
these operating instructions
-
all the operating instructions for the system components, especially the safe-
ty rules
(1)
(3)
(4) (5) (6) (7) (8) (9)
(2)
(10)
(11) (12)
IMPORTANT!
Fit the filter retaining plate
using the accompanying screws and insert
the filter. The connections are fitted with
screw connections as standard. If required,
attach the plug connectors provided to the
connections.