Fronius ActiveCharger 1000, Operating Instructions Manual

Page: 31 / 72

31
EN
Before commissioning
Safety
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
► All the work and functions described in this document must only be carried out by
trained and qualified personnel.
► Read and understand this document.
► Read and understand all the Operating Instructions for the system components, espe -
cially the safety rules.
Proper use The power source is intended exclusively for MMA welding and TIG welding.
The integrated battery must only be charged with the Fronius ActiveCharger 1000.
Any other use is deemed improper.
The manufacturer is not liable for damage resulting from such use.
Proper use also includes:
- carefully reading these operating instructions
- following all the instructions and safety rules in these operating instructions
- performing all stipulated inspection and maintenance work
Setup regulations
WARNING!
Danger from machines falling or toppling over.
This can result in serious injury and damage to property.
► Place devices on a solid, level surface in such a way that they remain stable.
The device is tested to IP 23 protection, meaning:
- Protection against penetration by solid foreign bodies with diameters > 12.5 mm (0.49
in.)
- Protected against spraywater at any angle up to 60° to the vertical
Cooling air
The device must be set up in such a way that cooling air can flow freely through the slots
in the front and rear panels.
Dust
Ensure that metallic dust is not sucked into the system by the fan, when carrying out grind -
ing for example.
Outdoor operation
The device can be set up and operated outdoors in accordance with IP23 degree of pro -
tection. Avoid direct wetting (e.g. from rain).
Power connec -
tion
The device is designed to be connected to the mains using the
Fronius ActiveCharger 1000 only (= hybrid mode, see Operating modes on page 65 ).