2.3.
Personal safety
a)
Do not use the device when tired, ill or under the influence of alcohol,
narcotics or medication which can significantly impair the ability to operate
the device.
b)
The device is not designed to be handled by persons (including children) with
limited mental and sensory functions or persons lacking relevant experience
and/or knowledge unless they are supervised by a person responsible for
their safety or they have received instruction on how to operate the device.
c)
The device can be handled only by physically fit persons who are capable of
handling it, properly trained, familiar with this manual and trained within the
scope of occupational health and safety.
d)
When working with the device, use common sense and stay alert. Temporary
loss of concentration while using the device may lead to serious injuries.
e)
The device is not a toy. Children must be supervised to ensure that they do
not play with the device.
2.4.
Safe device use
a)
Do not overload the device. Use the appropriate tools for the given task. A
correctly-selected device will perform the task for which it was designed
better and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not function properly (does
not switch the device on and off). Devices which cannot be switched on and
off using the ON/OFF switch are hazardous, should not be operated and must
be repaired.
c)
Disconnect the device from the power supply before commencement of
adjustment, cleaning and maintenance. Such a preventive measure reduces
the risk of accidental activation.
d)
When not in use, store in a safe place, away from children and people not
familiar with the device who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and for
any other conditions which may impact the safe operation of the device. If
damage is discovered, hand over the device for repair before use.
f)
Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
g)
To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
h)
When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
