4-10
P326mane.fm
5
OPERATING ELEMENTS
6
OPERATION
6.1
Installation
Do not expose power tools to rain or wet conditions!
The batteries are supplied partially charged.
Before the first use, the battery must be completely charged.
See separate operating instruction of the battery charger.
Never charge a damaged battery. Replace by a new one immediately.
Do not open batteries and store them only in dry and frost-proof rooms.
Do not store the battery pack together with metal objects (short circuit risk).
The maximum ambient temperature is 50°C.
Keep dry at all times.
Inserting the battery
Insert the battery from top to bottom into the tool
until
both unlatching push buttons are engaged.
When inserting the battery the LED - indication
shortly lights green.
Removing the empty battery
If the red LED starts lighting while a tensioning or
welding procedure, the capacity of the battery is
exhausted. All electric functions of the tool are blocked.
The seal efficiency is insufficient.
Warning! Straps with insufficient seal strength must be removed from the package!
The battery must be recharged.
Push the unlatching push buttons at both sides of the battery.
Push the battery out of the tool in the opposite direction of insertion.
When removing the battery the LED lights shortly red.
Tension button
Sealing lever
Unlatching push button
LED
Handle lever
LED - Indication at the tool
Green
During tensioning the LED
lights green.
Green
During welding the LED lights
green.
Yellow
Cooling time is running, the
tool must not be removed from
the strap.
Green
Cooling time is finished, the
tool can be removed from the
strap.
Red
Charge the battery.
Without
indication
Power saving mode
Summary of Contents for P326.0001.01
Page 2: ......
