Fromm P326.0001.01, User Manual

Page: 10 / 56

1-8
Tool doesn’t weld Welding gripper P32.1053 is dirty or
worn
Replace or clean welding gripper,
don’t use any hard objects for this
(see operation manual P326)
Welding stop gripper P32.1203 is dirty
or worn
Replace or clean welding stop gripper,
don’t use any hard objects for this
(see operation manual P326)
Damaged housing parts Replace housing parts
Defective circuit board Replace circuit board
Pressure spring N2.5294 defective Replace pressure spring
Needle free wheeling N3.4509 in
P32.0150 defective or assembled
reversed
Assemble the needle free wheeling
correct or replace it
Gearing parts of the welding gear are
defective
Check welding gear and replace
defective parts
Micro switch N5.2367 for welding is
defective
Replace micro switch
Defective gear bearing Replace bearing
Tool badly cuts the strap or
doesn’t cut at all
Cutter is worn or damaged Replace cutter
(see operation manual P326)
Wrong adjustment of the coupler
P32.1250
Check adjustment and readjust if
necessary
(see operation manual P326)
Welding gripper is worn Replace welding gripper
(see operation manual P326)
Welding time too short Change adjustment
(see operation manual P326)
Defective pressure spring N2.5237 Replace pressure spring
Tool switches off after a few
strappings
(Displaying empty battery)
Battery defective or empty Check the battery and change
defective batteries
Gear noise Tensioning or welding gear is worn Check component parts and replace
defective ones
SYMPTOM CAUSE REMEDY