1-10
Additional the screws N1.2112 have to be glued with the
idler step P32.0118 using
LOCTITE 222.
Don’t clamp the planet shaft on the pinion while loosening or
tightening the screws N1.2112.
Glue safety washer N1.6505 on both sides
with
Loctite 243
.
There should as less as possible glue
been applied on the thread of the screw
N1.1922. Therefore please move the
safety washer on the screw before
applying the glue.
1.4.6 Lubrication rules
All gear parts have to be lubricated with
MOLYKOTE BR2 PLUS
grease.
Lubrication interval: While each maintenance or after 12 months at the latest.
All bearing parts of the welding unit have to be cleaned and
lubricated with
Klüber Isoflex Alltime SL2
grease while
each maintenance.
Lubrication interval: While each maintenance or after 12
months at the latest.
All other parts have to be greased due to the explosion drawing.
Lubrication interval: While each maintenance
P32.0118
N1.2112
clamp
here
N1.6505
N1.1922
P32.1029
N3.1702 (6X)
P32.1027
P32.1053
Bearing
welding unit
Summary of Contents for P326.0001.01
Page 2: ......
