FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 2
1. GENERAL INFORMATION
Congratulations on the purchase of your Fromm Semi-Automatic Pallet Wrapping Machine.
We trust you will have many years of packaging efficiency.
Before proceeding with the operation or installation of your new machine please read this
manual thoroughly and gain a full understanding of the requirements, features and
operation of your new machine.
1.1 Note of Installation
To make sure a safe and correct operation, please check below conditions before install the
machine:
1. Power source capacity must be equal of the machine need.
2. Machine standard power is 240V (+- 10%).
3. Machine standard power Hertz is 50Hz. (+- 2%).
4. Machine is workable under the temperature between 0 - 45 .
5. Make sure the wire is tidy on the ground.
6. There should not be any vibration beside the machine, make sure the ground is flat.
1.2 Notice of Operation
To have good protection for the operator, please make sure the following conditions:
1. Before operating, please read the machine operational manual carefully.
2. Make sure there is no object put on the power cable.
3. Make sure there is no object put on the upper elevator unit.
4. Avoid any damp object or water around the electric parts.
5. Avoid film winded underneath the turntable.
6. Do not stand on or across the machine during operation.
7. When problem occurs, please read section - Suggested Maintenance and Trouble
Shooting.
