FSW10 Semi Automatic Pallet Wrapping Machine Operation Manual | FPA001 | Oct 2017 | Page 9
3.3 How to run a wrapping cycle
1. Turn the main power switch
(A)
to the
ON
position and check if the
Power
Light
illuminates.
2. Select the top and bottom wraps with selector switch (
C)
(wrapping cycle).
Mode 1: 3 bottom wraps and 2 top wraps.
Mode 2: 4 bottom wraps and 3 top wraps.
Please note: During the machine operation, there is no need to stop the machine, to change
the wrapping mode.
3. Press the Start button (
D)
to start wrapping the pack.
4. During the wrapping cycle, if the machine is required to be stopped, press the stop button
(
E)
to pause the machine, then press start button (
D)
to resume back to operation.
5. When the wrapping cycle is finished, the carriage will return back to the bottom of the
machine and stop automatically.
6. Return to
Operation Cycle
step 2, Start the Button Wrapping Cycle.
7. Please turn
OFF
the main power switch (
A)
when the machine is no longer in use.
Please press the emergency stop button (
F)
to stop the machine instantly, if any
Emergency
has occurs.
SECURITY BAR
If the security switch is activated, the machine will stop moving. Make sure you have cleared the
security bar to reset the security switch. Press the
START
button to continue wrapping cycle.
