SERVICE MANUAL FS15x_V01-V02-V03-EN03_R3.doc
FROMM
it is forbidden to duplicate this manual or parts of it in any way or any form without written permission of the author © 2017
website: www.fromm-stretch.com
43
ERRORS DURING OPERATION
THE FILM TENSION DOES NOT CHANGE WITH CARRIAGE 16.8440
– V01
Problem suggestion
Possible solution
- Clutch not connected properly
- Check the height of the core.
- Check the correct position of the top
brake unit with spring (
Fig. 1
)
- Clutch not connected properly
- Carriage makes noise at the below part
- Friction disk has to be replaced (
Fig. 2
)
FS3.2034
- Film feed in the wrong way
- Film should be applied before the metal
roll (
Fig. 3
)
-
Don’t feed the film between metal roll
and carriage frame
Fig. 1
Fig. 2
Fig. 3
Should the problem persist, contact the Customer After-Sales Service of MANUFACTURER
THE FILM TENSION DOES NOT CHANGE WITH CARRIAGE 16.8440
– V02
Problem suggestion
Possible solution
- Tension on the film to high
- Clean the friction disk. (1) (
Fig. 1 & 2
)
- Clean the metal disk. (2) (
Fig. 2
)
- Clean the part below the core holder
- Film feed in the wrong way
- Film should be applied before the metal roll (4) (
Fig. 1 & 2
)
Don’t feed the film between Metal roll and carriage frame
Fig. 1
Fig. 2
1
1
2
3
3
4
4
