If the head of the rotary agitator is not adequately covered by the remaining fuel:
❒ Close all openings to the store to seal out dust
❒ Load a small amount of fuel (approx. 2-3 m³)
➥ Pile it up on and around the head of the rotary agitator
➥ The head of the rotary agitator should be completely covered
After working in the store:
❒ Switch on the power supply to the entire system
➥ Depending on the model of system via boiler, expansion switch cabinet, etc.
❒ Tap “On” in “Bunker filling rotary agitator” during manual operation
➥ The rotary agitator head runs for approx. 3 minutes
❒ Wait until the rotary agitator arms / spring blades are touching the head of the
rotary agitator (approx. 2 revolutions)
❒ Close all openings to the store to seal out dust
❒ Add the rest of the fuel
5.4 During operation
The boiler is controlled by the boiler controller. The discharge system switches on and
off automatically when material is requested.
NOTICE
When transporting wood chips or pellets using the feed screw, there may be
noise, depending on the function.
5.5 Decommissioning
5.5.1 Disassembly
To disassemble the system, follow the steps for assembly in reverse order.
5.5.2 Disposal
❒ Disposal should be carried out according to the valid national regulations and
guidelines.
❒ You can separate and clean recyclable materials and send them to a recycling
centre.
5
Operating the system
During operation
40
Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
