Color Screen Weather Station User Manual
5.4.1 Time ALARM
Press
ALARM
button once, you will see the ALARM time.
Press and hold the
ALARM
button for 2 seconds, you will enter the ALARM setting interface.
Please follow the below sequence to operate settings:
1.
Press the
TEMP./+
and
BARO/-
button to change the hour.
2. Press
SET
to confirm the hour and skip to minute setting. And press the
TEMP./+
and
BARO/-
button to change the minute.
3. Press
SET
to confirm the minute and skip to Alarm on/off setting. Press
TEMP./+
and
BARO/-
button to switch on/off the time ALARM.
4. Press
SET
to skip to Ice ALARM on/off setting. Press
TEMP./+
and
BARO/-
button to switch
on/off the Ice ALARM(Refer to 5.4.2).
5. Returns to the normal display mode.
5.4.2 Ice ALARM
Ice ALARM is an ALARM happens when outdoor temperature falls into (or goes up to) -3~2 c
range. A snow icon
will appear and flash on the console. If the BEEP is switched on, a
sound ALARM would be also activated when ice ALARM occurs.
5.4.3 Cancelling the ALARM
When time ALARM or ice ALARM is triggered, press any key to close the sound alarm. During
time ALARM, press
LIGHT/SNOOZE
key can enter snooze mode.
The ice ALARM will reset automatically once the value has fallen into the ice ALARM range.
5.5 Calibration Mode
While in normal node, press and hold the
SET
and
BARO./-
buttons 5 seconds to enter calibration
mode.
The calibration sequence would be as below:
1.
Outdoor temperature calibration.
2.
Outdoor humidity calibration.
3.
Indoor temperature calibration.
