Model: PX500-A
FRIZZLIFE INC.
www.frizzlife.com
Page 5
Fig.3
Fig.4
Fig.5
Fig.6
Fig
.
7
Fig
.
8
Fig
.
9
Shut off the water supply. (Fig.7)
Disconnect the cold water pipe from angle valve.
Twist the feed water valve onto the angle valve and make sure the O ring is
loaded. (Fig.8)
Connect cold water pipe onto the feed water valve. (Fig.9) Valve installation
complete.
Connect the other end of 3/8" tubing into "Supply" port on the back of the system,
make sure to insert the tubing about 0.8 inch to the end of the fitting. ( Fig.11)
Put the lock clip on the fitting to secure the connection. (Fig.12)
Step 3: Connect the water supply (COLD WATER ONLY)
Except " DO NOT USE" one, remove all other three plugs by pressing the
fitting sleeves. (Fig. 10)
Step 4: Connect the "SUPPLY" water tubing