Model: PX500-A
FRIZZLIFE INC.
www.frizzlife.com
Page 7
Fig
.
18
Fig
.
20
Fig
.
19
Insert the other end of 1/4" red tubing into the "Waste" port on the back of the
system.
（
Fig.18, Fig.19
）
Step 6: Connect the "WASTE" water tubing
!
Note: If your counter top or granite does not have an existing hole, please drill
one (1/2") before proceeding.
!
Note: Please make sure the tubings are fully inserted,
otherwise may result in water leakage.
Cut the 1/4" white tubing in proper length, and insert one end into the “Filtered”
port on the back of the system. (Fig.20)
Step 7: Connect the "FILTERED" water tubing
Follow the steps below and mount the faucet onto the sink top.
(Fig.21, Fig.22, Fig.23)
Mount the rubber and fasten the hand fixture underneath (Fig.24, Fig.25, Fig.26)
Connect the other end of 1/4" white tubing from the "FILTERED" port into the
1/4" quick fitting. (Fig.27, Fig.28, Fig.29)
Step 8: Install the drinking faucet
!
Note: If the thickness of your counter is over 1.5” (3.85cm), please contact us at
[email protected] to claim for longer stem.
