background image

The system can either connect to under sink water supply or refrigerator 
water valve. It is competible with both PEX tubing  (provided in the 
package)  and flexible copper tubing (not included). 

Installation Method 1
Under Sink Water Valve + 
PEX Tubing(included)/Copper Tubing(not included) ------ Page 4

Installation Method 2 
Refrigerator Water Valve + 
PEX Tubing(included)/Copper Tubing(not included) ------ Page 8

4. Installation Methods 

Model: MS99

Page 3

2. What is the use of elbow fitting? 

1. Do not use with water that is microbiologically unsafe or of unknown 

    quality without adequate disinfection.
2. Testing was performed under standard laboratory conditions, actual 

     performance may vary.
3. For cold water use only.

5. Do not allow children under 3 years of age to have access to small 

     parts during installation.
6. The installation must comply with all applicable state and local 

     regulations.

4. This filter must be protected from freezing, which can cause cracking 

     of the filter and water leakage.

Precautions: 

Please choose an appropriate installation method before proceeding. 

Choose the most appropriate method and skip to the correlated page directly.

Note: 

If the tubing is not fulling inserted, water leakage 

may occur. Pulling out the tubing directly will damage 

the fitting, which may also cause water leakage.

water leakage.

please remove the blue lock clips from the fitting, push in the lock sleeve, 

and then pull out the tube from the fitting 

If the space too narrow, please replace the 

1/2" straight fitting on the filter system with 

elbow fitting provided for more convenient installation.

To disconnect:

Summary of Contents for MS99
















Reviews: