Frizzlife MS99 Owner'S Manual Download Page 14

Frizzlife is not liable for anything that we deem as abuse of the units, including but not 
limited to, misuse of product outside of intended use, equipment modifications, 
unauthorized repairs, improper installation, damage from freezing, hot water, fire or 
other acts of God outside of Frizzlife control. This warranty will be void if defects occur 
due to failure to observe the following conditions:
• Incoming water to the the system cannot exceed 100°F.
• Do not use outdoors or in a location that is subjected to direct sunlight or freezing.

1.

Filter Cartridges are considered as disposable items , thus are not covered by warranty.

2.

Customer is responsible for proper operation, which includes complete and continual 
leak inspection.

Most of the unit components are made of plastic and eventually can break or crack 
from stress.
Frizzlife cannot be held liable for any damage caused by leaks.
There are no other warranties which extend beyond what is described above.
To receive warranty service, please contact Frizzlife at [email protected]

3.

This warranty will not be effective unless and until the Frizzlife is shown to have been
used in accordance with the installation and maintenance instructions accompanying 
the product.

Model: MS99

Page 12

To be free of defects in material and workmanship by Frizzlife INC, Frizzlife will replace 
or repair components of the unit that Frizzlife has deemed to be broken within the limits 
of the warranty without charge. The customer is not responsible for any freight involved 
with shipping the item back for inspection and shipment of replacement items. 
Frizzlife is not liable for cost of removal, installation, transportation or any other charges 
in connection with a warranty claim.

6.Maintenance

Do not use with water that is microbiologically unsafe or of unknown quality without 
adequate disinfection.

Please replace the filter cartridges regularly to ensure optimal filtration performance. 

The testing was performed under standard laboratory conditions, actual performance 
may vary depending on the source water quality and water usage. In case of premature 
blockage and failure of the filters, it is recommended to replace the filter in accordance 
with actual usage.

Check the system and water pipe fittings regularly for water leakage to avoid any 
property damage.

7. Limited Product Warranty

TWO YEAR LIMITED FRIZZLIFE WARRANTY

The Frizzlife MS99 Refrigerator Water Filter Systems are warranted to the original 
purchaser.

MS99 Refrigerator Water Filter System     Warrantor: FRIZZLIFE INC

Summary of Contents for MS99
















Reviews: