04
Note:
If your angle valve is 1/2”, please install the converter
provided firstly.
Step 4: Connect to the main faucet
IF ANGLE VALVE OUTLET IS 3/8”
3/8” Comp(9/16” thread)
IF ANGLE VALVE OUTLET IS 1/2”
1/2” thread
connect one part of the
adaptor to the angle valve
connect the other part of
adaptor to the outlet port
1.Connect the existing faucet hose to “Outlet”
port of the system
If your existing faucet hose is not long
enough, please select and use the proper
outlet hose provided to finish connection.
Step 5: Check for leaks
1. Turn on the water supply valve to check
for leaks
2. Flush the system for 15 minutes before use
1/2”
1/2” to 3/8”
3/8” to 1/2”
Faucet hose
Step 3: Connect the water supply
(COLD WATER ONLY)
1. Shut off the water supply
2. Remove the feed water hose from
the angle valve
3. Connect the inlet hose to the feed
water valve
1
2
3
