manualshive.com logo in svg

Fritz! Fon WLAN 7140, Installation, Configuration And Operation

Share
Download
Fritz! Fon WLAN 7140 Installation, Configuration And Operation Download Page 78

Removing the Program Group in Windows Me and 98

78

FRITZ!Box Fon WLAN – 11 Removing the FRITZ!Box Fon WLAN

Removing the Program Group in Windows Me 
and 98

Proceed as follows to remove the “FRITZ!Box” program
group:

1.

Open “Start / Settings / Control Panel / Add/Remove
Programs”.

2.

Select the “AVM FRITZ!Box” entry from the list of cur-
rently installed programs.

3.

Click the “Add/Remove...” button.

Rebooting the computer concludes the uninstallation of the
program group.

Removing the Program Group in Windows 2000

Proceed as follows to remove the “FRITZ!Box” program group
in Windows 2000:

1.

Open “Start / Settings / Control Panel / Add/Remove
Programs”. Make sure that the “Change or Remove Pro-
grams” button is selected in the column at left.

2.

Select the “AVM FRITZ!Box” entry from the list of “Cur-
rently installed programs”.

3.

Click the “Change/Remove” button.

This completes uninstallation of the program group.

11.3 Removing the FRITZ!DSL Software

If the FRITZ!DSL software package is installed on a computer
and you would like to remove it, perform an uninstallation
using the Windows Control Panel.

Removing the FRITZ!DSL Software Package in 
Windows XP

Proceed as follows to remove the FRITZ!DSL software pack-
age in Windows XP:

1.

Open “start / Control Panel / Add or Remove Pro-
grams”. Make sure that the “Change or Remove Pro-
grams” button is selected in the column at left.

VoIPon     www.voipon.co.uk      [email protected]      Tel: +44 (0)1245 808195      Fax: +44 (0)1245 600030

Summary of Contents for Fon WLAN 7140
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands