manualshive.com logo in svg

Fritz! Fon WLAN 7140, Installation, Configuration And Operation

Share
Download
Fritz! Fon WLAN 7140 Installation, Configuration And Operation Download Page 42

USB Mass Storage

42

FRITZ!Box Fon WLAN – 7 USB Devices

7.2

USB Mass Storage

USB mass storage devices include hard drives and memory
sticks.

File Systems Supported

The USB host controller supports the mass-storage file sys-
tems FAT and FAT32.

Connecting the USB Mass Storage Device

A USB mass storage device can be connected either directly
to the USB host controller, or via the USB hub (see the sec-
tion “USB Hub” on page 47).

Configuring Access Rights and Password Protection for the 
USB Mass Storage Devices

On the FRITZ!Box Fon WLAN user interface you can configure
access rights and a password to protect the USB mass stor-
age devices.

1.

Open a web browser on one of the computers connect-
ed to the FRITZ!Box Fon WLAN.

2.

Open the FRITZ!Box Fon WLAN user interface (see the
section “Opening the User Interface” on page 26.

3.

Set up the access rights and password protection for
the USB mass storage devices in the “USB Devices /
Mass Storage Device” menu.

The access rights and password are valid for all USB mass
storage devices. It is not possible to assign a different pass-
word for each individual mass storage device.

Accessing the Data in the USB Mass Storage Device

USB mass storage devices connected to the FRITZ!Box Fon
WLAN directly or via a USB hub are displayed with their de-
vice name in the “USB Devices / Mass Storage Device” menu
on the user interface.

VoIPon     www.voipon.co.uk      [email protected]      Tel: +44 (0)1245 808195      Fax: +44 (0)1245 600030

Summary of Contents for Fon WLAN 7140
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands