78
Making Telephone Calls with Convenience Functions
Accepting or Rejecting Waiting Calls on an Analog Exten-
sion of the FRITZ!Box
When the “call waiting” function is switched on, you hear a
signal whenever you receive an external call during an active
telephone conversation. You can then accept the call within
30 seconds. If you do not accept the call, it will be rejected.
You can enable and disable the “call waiting” function in the
FRITZ!Box user interface in the menu “Telephony / Telephony
Devices”.
D
Now all parties can confer together. If either of the
other two parties hangs up, your connection with
the remaining participant remains active.
O
To end the three-party conference call, hang up the
handset.
R2
This keyboard shortcut ends the conference and re-
connects you with the party you called before the
conference began. The second call is on hold. You
can alternate between the two parties by dialing the
keypad sequence again.
Accepting or Rejecting Waiting Calls on an Analog Extension
R2
Use this keypad sequence to accept a waiting call.
The first call is on hold.
If you would like to end the first call, hang up the re-
ceiver. As soon as you have hung up your telephone
will ring. When you pick up the receiver, you will be
connected with the waiting call.
R1
If the first call was on hold, you can return to the
first call using this keypad sequence.
R0
With this keypad sequence you can reject a waiting
call.
Conducting a Three-party Conference Call
FB6840LTE-e2.fm Seite 78 Dienstag, 29. Mai 2012 5:34 17
