Fritz! Box 6490 cable Installation And Operation Manual Download Page 35

Page: 35 / 173

Connecting Telephones and Other Terminal Devices

FRITZ!Box 6490 Cable

Connecting Telephones and Other Terminal Devices

This chapter describes how to connect telephones, fax machines, an-
swering machines and telephone systems (PBXs) to the FRITZ!Box.

9.1

Connecting Analog Telephones and Terminal Devices

You can connect two analog terminal devices.

Two Sockets Have to Stay Free (Not Allocated)

The FRITZ!Box has different sockets for analog terminal devic-
es:

•

on the back, “FON 1” and “FON 2” for terminal devices
with RJ11 plug

•

on one side, “FON 1” and “FON 2” for terminal devices
with TAE plug

You can connect a total of two analog terminal devices to
these sockets. One “FON 1” socket and one “FON 2” socket
have to stay free (not allocated).

Connecting a Telephone

Connect the telephone to a “FON 1” or “FON 2” socket.

Keep in mind that one “FON 1” socket and one “FON 2”
socket have to stay free (not allocated).

Configure the telephone in the FRITZ!Box; see

page 40

FON

FON 1

N 2

FON 2

LAN

LAN 1

LAN 2

LAN

LAN 3

LAN

LAN 4

Power

FON S

WLA

WPS

DECT

Info

WLAN

DECT

Fon

Power/Cable

CABLE

Summary of Contents for Box 6490 cable














































































































































































Search results

Summary of Contents for Box 6490 cable

Reviews:

Related manuals for Box 6490 cable

Brands by name

Popular brands

Fritz! Box 6490 cable, Installation And Operation Manual

Search results

Summary of Contents for Box 6490 cable

Reviews:

Related manuals for Box 6490 cable

Brands by name

Popular brands