Fritz! Box 6490 cable Installation And Operation Manual Download Page 156

Page: 156 / 173

FRITZ!Box 6490 Cable

156

Uninstalling Supplementary Software

Click the “Programs and Features” entry.

The “Uninstall or change a program” list shows all of the
programs installed on your computer.

Mark the AVM program you want to remove in the list.

Click the “Uninstall” button.

The program will be removed.

Uninstalling Programs in Windows 7

Open “Start / Control Panel / Programs”.

Under “Programs and Features”, click “Uninstall a pro-
gram”.

Mark the AVM program you want to remove in the list.

Click the “Uninstall/Change” button.

The program will be removed.

Uninstalling Programs in Windows Vista

Open “Start / Settings / Control Panel / Programs and
Functions”.

Mark the AVM program you want to remove in the list.

Click the “Uninstall/Change” button and confirm with
“Continue”.

The program will be removed.

Summary of Contents for Box 6490 cable














































































































































































Search results

Summary of Contents for Box 6490 cable

Reviews:

Related manuals for Box 6490 cable

Brands by name

Popular brands

Fritz! Box 6490 cable, Installation And Operation Manual

Search results

Summary of Contents for Box 6490 cable

Reviews:

Related manuals for Box 6490 cable

Brands by name

Popular brands