pulverisette 16
Page 15
4.7 Readjusting the impact gap
From time to time, the gap between the grinding insert and the impact
plates of the cross beater should be inspected.
(See image)
*
Pull the power plug
*
Open the mill housing
*
Check the gap between the grinding insert
ME
and the impact
plate
PP
with a feeler gauge =
desired value ~ 1 mm
, whereby
the gap to the bottom sieve may not be
< 1 mm
Adjust the gap between the grinding insert and impact plate, if neces-
sary.
*
Screw the impact plates tight with a hex key M5
