pulverisette 15
page 8
2.4 Danger
Points
•
Danger of injury from sharp blades!
•
Danger of pinching when closing hopper lid!
•
Danger of pinching when opening the upper half of the hous-
ing! (Carefully place the housing half on the support pro-
vided)
•
Danger of pinching when closing the upper half of the hous-
ing!
•
Danger of pinching under the hopper lid!
•
Danger of pinching when fitting and releasing the collector!
2.5 Electrical
Safety
General
On turning the switch to
Stop (0)
the motor is switched off.
⇒
The mill will stop within seconds.
•
The collector can be detached.
•
The mill cover can be opened.
Protection against Restarting
If power fails during operation, the motor is switched off.
⇒
The mill will stop within seconds.
•
The collector can be detached.
The mill does not restart when the supply returns.
⇒
The mill is secured against restarting.
⇒
On turning the switch to
Start (I)
, the motor is switched
on and the mill takes up its function.
Overload Protection
In the event of overloading, a motor current protection switch will switch
off (the rotary switch returns to the STOP (0) position).