14
-
Attention
: the knives are very sharp!
-
NEVER
leave the appliance unattended when plugged in.
-
NEVER
use extension cords and
ALWAYS
unroll the cord completely
-
NEVER
use the cord in the proximity of sources of heat, such as ovens, stoves or heating
-
Repairs can only be done by and recognized repair shop.
-
Persons who haven’t read this instruction manual cannot use this appliance.
-
NEVER push food with your hands into the filling shaft. Always use the pusher. The use of
other objects like a spoon or a spatula can damage the mill. If food is stuck, always turn the
appliance off and wait until it has completely stopped turning. Only then remove the parts
to remove the food.
-
Remove bones, cartilage and tendons of the meet before grinding it.
-
When you grind nuts, only add them in small amounts and wait until the screw completely
pushed them before you add some more.
-
Cut the ingredients in small pieces so that they fit easily in the filling shaft.
-
Don’t overload the appliance or don’t use too much strength when you push the food down
with the pusher.
-
The appliance is equipped with a safety function. If the appliance doesn’t work, bring it back
to your point of sale for servicing.
-
Always make sure to assemble the appliance correctly. For your own safety the appliance
will not work if not assembled properly.
-
Always place the appliance on a stable surface, like a kitchen table so that the appliance
cannot shift of fall.
-
Do not use aggressive cleaning products.
-
Never let the cord hang over the side of the table.
2.
TECHNICAL INFORMATION
-
You will find the technical information on the rating label at the bottom of the appliance.
-
Use the appliance for a maximum time of 10 minutes at the time.
-
The mandatory time between 2 sessions is 30 minutes.
3.
BEFORE THE FIRST USE
-
Remove all packaging and stickers.
-
Keep packaging away from children.
-
First check your appliances for possible damages. If it is damaged, do NOT use the
appliance but bring it back to your sales point.
-
Before the first use we recommend to clean all components thoroughly (see ‘Cleaning’).
-
All parts should be dry!
-
Ensure that the voltage marked on the appliance is the same as your main voltage.
According to the safety law: only use earthed sockets.
4.
ASSEMBLING OF THE MEAT GRINDER
-
Completely unroll the electrical cord and put the appliance on a stable surface. Put the plug
in the socket. Always check the mains voltage.
-
Mount the filling shaft on the motor housing. Use the openings on the filling shaft and the
opening in the housing to correctly mount the filling shaft.
-
Put the screw in the grinding opening, with the white gear on the inside.
