Fristam Pumps FP Series, Instruction And Maintenance Manual, Page: 30 / 32

Fristam FP/FPX Series Pump
30
EC D
ECLARATION OF
C
ONFORMITY
The manufacturer: Fristam Pumps
2410 Parview Road
Middleton, WI 53562
USA
herby declares that the following product (pump
with motor):
• Centrifugal pump types: FPR, FPX, FP, FZX,
FM, FPH/FPHP, FS
• Positive displacement pump types: FKL con-
forms to the requirements of the
Machinery
Directive (2006/42/EC) .
The machine also complies with all requirements
of the
Low Voltage Directive (2006/95/EC) and
the
EMC Directive (2004/108/EC)
.
The following harmonized standards have been
applied:
• DIN EN 809 Pumps and pump units for liq-
uids – Common safety requirements
• DIN EN 12100 Safety of machinery – General
principles for design – Risk assessment and
risk reduction
Authorized person responsible for the compila-
tion of the technical file:
Duane Ehlke / Vice President of Operations
2410 Parview Road
Middleton, WI 53562
Date: 2014-5-9
EG D
ECLARATION OF
I
NCORPORATION
The manufacturer: Fristam Pumps
2410 Parview Road
Middleton, WI 53562
USA
herby declares that the following product (pump
without motor):
• Centrifugal pump types: FPR, FPX, FP, FZX,
FM, FPH/FPHP, FS
• Positive displacement pump types: FKL
are partly completed machines in accordance
with the
Machinery Directive (2006/42/EC) An-
nex II B .
The above mentioned products meet the relevant
general health and safety requirements laid down
in Annex I of the above Directive.
The above named partly completed machines
must not be put into service until the final ma-
chinery into which they are to be incorporated
has been declared in conformity with the provi-
sions of the
Machinery Directive (2006/42/EC) .
The above products comply with the following
standards:
• DIN EN 809 Pumps and pump units for liq-
uids – Common safety requirements
• DIN EN 12100 Safety of machinery – General
principles for design – Risk assessment and
risk reduction
On request, the manufacturer shall forward the
special documentation of the partly completed
machine in electronic format to the relevant state
authorities. The special technical documentation
relating to the machine according to Annex VII B
has been compiled.
Authorized person responsible for the compila-
tion of the technical file:
Duane Ehlke / Vice President of Operations
2410 Parview Road
Middleton, WI 53562
Date: 2014-5-9