ASSEMBLY INSTRUCTIONS
7
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above
of this instruction sheet you will find an explosion drawing with all single parts (marked
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FIG.1:
Attach the Rear Stabilizer (4) to the Main
Frame (16) using two sets of Ø10 Flat
Washers (5) and bolt 1 (3)
Attach the Front Stabilizer (15) and Large
Roller Support Frame Assembly (8)to the
Main Frame (16) using two sets of Ø10
Flat Washers (5) and bolt 1 (3). Two large
rubber rollers (56) are respectively locked
on both sides of the large Roller Support
Frame Assembly (8) with a locknut (92)
FI G.2:
Slide the Vertical Seat Post (10) into the
seat post housing on the main frame (16).
And put the knob up, then release the
round nut(48) , Then slide the Seat Post
(12) into the Vertical Seat Post (10),Then
fixing the bolt8 (48) You will have to
slacken the knurled section of the
Adjustment Knob (9) and pull the knob
back and then select the desired height.
Release the knob and retighten the
knurled portion.
3
5
4
5
3
15
92
16
56
8
56
92
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are
of this instruction sheet you will find an explosion drawing with all single
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FIG.1:
Attach the
Frame (
Washers (
Attach the
Roller Support Fr
Main F
Flat W
rubber rollers (56) are respectively locked
on both sides of the large Roller Support
Frame Assembly (8) with a locknut (92)
FI G.2:
Slide the Ve
seat post housing on the main frame (1
And put the knob up, then release the
round nut(48) ,
(12) into the Vertical Seat Post (1
fixing the bolt8
slacken the knurled s
Adjustment
back and then select the desired height.
Release the knob and retighten the
knurled portion.
FIG 1:
Attach the Rear Stabilizer (4) to the Main Frame (16) using two
sets of Ø10 Flat Washers (5) and bolt 1 (3) Attach the Front
Stabilizer (15) and Large Roller Support Frame Assembly (8)to
the Main Frame (16) using two sets of Ø10 Flat Washers (5) and
bolt 1 (3). Two large rubber rollers (56) are respectively locked
on both sides of the large Roller Support Frame Assembly (8)
with a locknut (92)
FIG 2:
Slide the Vertical Seat Post (10) into the seat post housing on the
main frame (16). And put the knob up, then release the round nut(48)
, Then slide the Seat Post (12) into the Vertical Seat Post (10),Then
fixing the bolt8 (48)
,
You will have to slacken the knurled section of
the Adjustment Knob (9) and pull the knob back and then select the
desired height. Release the knob and retighten the knurled portion.
Now fix the Seat (13) to the Seat Post (12) as shown, and tighten the
bolts around the screws under the seat.
FIG 2
FIG 1
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this
instruction sheet you will find an explosion drawing with all single parts (marked with numbers)
which this item consists of.
13
48
12
10
9
16