FRIGOMAR ENG - CU50VFD-CU70VFD 20190108.doc81218 Page 4 of 24
WARNING!
If the information in these instructions are not followed exactly, a fire, carbon monoxide
poisoning or explosion may result causing property damage, personal injury or loss of life. Read all
the instruction carefully prior to beginning the installation. Do not begin installation if you do not
understand any of the instructions. Improper installation, adjustment, alteration, service or
maintenance can cause property damage, personal injury or loss of life. Installation and service
must be performed by a qualified installer, service agency in accordance with these instructions
and in compliance with all codes and requirements of authorities having jurisdiction.
2.2 TRANSPORTATION BEFORE INSTALLATION
To make easier the transportation of the machine before installation it is possible to replace the 4 M6 screws of the upper
aesthetic panel with 4 M6 eyebolts.
WARNING!
During the transportation use all individual protection
to operate in total safety.
Once placed the unit is recommended to replace the eyebolts with the M6 screws.
3.0 INSTALLATION AND MAINTENANCE
ATTENTION!
Do not stress hydraulic connections. To lift or move the unit use the wooden base.
Electrical requirements and wiring
WARNING!
Failure to follow safety warnings exactly could result in serious injury, death
and property damage. Turn off electrical power at fuse box or service panel before
making any electrical connections and ensure a proper ground connection is made
before connecting line voltage.
WARNING!
All electrical work can be performed only by qualified personnel, in
conformity with low and regulations of the country where the system is being
mounted. The electrical connections must be done following the wiring diagrams,
supplied with the unit.
