10. DISASSEMBLY INSTRUCTIONS
1
．
Remove the grille
1
）
Take out the screw of the installation plate and remove
the installation plate.
2
）
Take out the screws of
the mounting plate
.
3
）
Hold the both sides of the front panel and drag it towards
oneself and remove it.
4
）
Take out the screws of the ornamengt grille and remove the
ornament grille.
5
）Take away the air filters in the grille.
6
）Open the screw cover ,then take out the screws of the
grille and remove the grille.
7) Remove the mounting plate.
HKEB 261 X
OPERATION PROCEDURE
PHOTOS
Screw
Installation Plate
Screw
Mounting Plate
Base Ass'y
Front Panel
Grille
Ornament Grille
Air Filter
Screw
Screw
Display Board
2
．
Remove the electrical control box
1
）
Take out the screw of the electrical cover and remove it.
2
）
Remove the indoor coil sensor from the sensor bracket.
3
）
Take out the screws of the electrical control box and
disconnect all the connectors on the printed circuit
board,then remove the electrical box.
Screw
Electrical Cover
Indoor Coil Sensor
Screw
Terminal Screw
Screw
HKEB 351 X
