Lighting The Side Burner
LEAK TESTING
Make sure all burners are turned to “OFF”.
Turn on the gas at the cylinder (LP models) or main
valve (Natural models). DO NOT turn on the side
burner. Perform a leak test at all connections and fit-
tings by spraying a 50/50 solution of water and soap.
If any bubbles appear, correct the leak before
attempting to light the grill or side burner.
LIGHTING INSTRUCTIONS
Push and turn the control knob to the “HIGH”position
and immediately press and hold the electronic igniter
button. You’ll hear a snapping sound. It may be nec-
essary to hold the electronic starter button for about 4
seconds. If the burner does not light in 4 seconds,
turn the knob to the “OFF” position and wait 5 min-
utes before trying again. Repeat above steps to light
remaining burners. (See Fig. 5)
Match Lighting
If by chance the electronic igniter does not light the
burner, the burner may be lit with a match. Keep
your face as far away from the burner as possible
and place a lit, long stem match through the spaces
in the grate to the ports of the burner. Position the
match near the burner ports and push and turn the
control knob to the “HIGH”position.
Fig. 5
