Frigidaire PRFC2383AF Page 45 Use & Care Manual Download

Page: 45 / 50

TROUBLESHOOTING

Concern Potential Cause

Common Solution

Dispenser (Ice & Water)

Dispenser

will not

dispense

ice.

• There is no ice in the

bin to be dispensed.

• The refrigerator doors

are not completely

closed.

• Dispenser paddle has

been pressed too long

and the dispenser

motor has overheated.

• See the “Ice maker is not making

any ice” section above.

• Be sure the refrigerator doors are

completely closed.

• The motor overload protector will

reset in about three minutes and

then ice can be dispensed.

Ice

dispenser is

jammed.

• Ice has melted and

frozen around auger

due to infrequent

use, temperature

fluctuations, and/or

power outages.

• Ice cubes are jammed

between ice maker and

back of ice container.

• Remove ice container, thaw,

and empty the contents. Clean

container, wipe dry, and replace in

proper position. When new ice is

made, dispenser should operate.

• Remove ice cubes that are jamming

the dispenser.

Dispenser

will not

dispense

water.

• Water filter not seated

properly.

• Water filter is clogged.

• Household water line

valve is not open.

• Remove and reinstall the water

filter. For PurePour, be sure to push

the filter in all the way until it clicks

into place and is secured inside of

the water filter housing.

• Replace filter cartridge. Be sure

to push filter all the way in until

it clicks into place and is secured

inside of the water filter housing.

• Open household water line

valve. See CONCERN column

AUTOMATIC ICE MAKER.

Water

not cold

enough.

• The water dispensing

system is not designed

to chill water.

• Add ice to cup or container before

dispensing water.

Water has

an odd

taste and/or

odor.

• Water has not been

dispensed for an

extended period of

time.

• Unit not properly

connected to cold

water line.

• Draw and discard 10-12 glasses of

water to freshen the supply.

• Connect unit to cold water line

that supplies water to the kitchen

faucet.

Summary of Contents for PRFC2383AF



















































Search results

Summary of Contents for PRFC2383AF

Reviews:

Related manuals for PRFC2383AF

Brands by name

Popular brands

Frigidaire PRFC2383AF, Use & Care Manual

Search results

Summary of Contents for PRFC2383AF

Reviews:

Related manuals for PRFC2383AF

Brands by name

Popular brands