background image

20

External Water Dispenser Controls

1

Change 

Temperature

Select Freezer or Refrigerator icon to 

change temperature.

Press +/- buttons to set the temperature

Freezer control 

range: 

-6˚F/-21˚C – 

+6˚F/-15˚C

Refrigerator 

control range:

+34˚F/+1˚C – 

+44˚F/+7˚C

2

Clear Alerts

Resets any alarms that are active and 

illuminated on the display (DOOR OPEN, 

HIGH TEMP, POWER OUTAGE).

3

Freeze 

Boost

Prior to grocery shopping, we recommend 

you activate 

Freeze Boost

 to lower the 

temperature and freeze food faster. 

Freeze 

Boost

 will remain active for up to 24 hours 

before automatically deactivating or 

manually exiting by pressing 

Freeze Boost

 

to turn the function off. This will reset the 

freezer to the previous temperature setting. 

4

F/C

Touch to toggle display from Fahrenheit 

to Celsius.

5

Ice Maker

Press and hold for 3 seconds to turn ice 

maker on/off. When indicator is lit, ice 

maker is on. When indicator is not lit, ice 

maker is in the OFF state and will stop 

making ice. While off, ice dispensing can 

continue as long as there is ice in the 

bucket. When ice maker is off and ice is 

dispensing, indicator will blink.

6

Default 

Settings

Press and hold for 3 seconds to reset to 

Factory settings.

7

Water Filter

Press and hold button to reset after filter 

has been replaced, status shown at right of 

button will reset to GOOD.

8

Air Filters

Press and hold to reset after filter has 

been replaced, status shown at right of 

button will reset to GOOD.

1

2

3

6

5

7

8

4

WATER

Press the 

WATER

 key to 

select water. 

CRUSH

Press the 

CRUSH

 key to 

select crushed ice.

CUBE

Press the 

CUBE

 key to 

select cubed ice. 

         light

Toggles dispenser light on 

and off.

External Water Dispenser Control Display

CONTROLS AND SETTINGS

Summary of Contents for PRFC2383AF



















































Reviews: