background image

32

Note:

 The oven temperature

adjustments made with this
feature will not change the
Self-Clean cycle
temperature.

The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is needed.

 

INSTRUCTIONS

PRESS

DISPLAY

Adjusting Your Oven Temperature

Stopping or Interrupting a Self-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:

1.

Press 

.

2.

Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" icon is no longer displayed,the oven door
can then be opened (Fig. 8).

When the Self-Clean cycle is done:

1.

The time of day,"Hot, DOOR LOCKED" and "CLEAN" icon will
remain in the display (See Fig. 7).

2.

Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED"  icon is no longer displayed, the oven
door can then be opened.

IMPORTANT NOTES 

when using the Self-Clean feature:

1. The Self-Clean feature will not operate whenever a radiant surface remains ON.

2. A Self-Clean cycle cannot be started if 

Oven Lockout

 feature is active.

3. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly

cleaned. Once power is restored, the Cooktop will remain locked. To unlock the cooktop press and hold the

 

 pad

 for 3

seconds. The red cooktop lock icon will disappear from the display.  Then set for another Self-Clean cycle to finish.

4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for a delayed Self-Cleaning cycle 12-24 hours in advance see page 16 for instructions to set the
control for the 24 hour time of day display mode.

INSTRUCTIONS

PRESS

DISPLAY

Self-Cleaning

Fig.7

Fig.8

To adjust the oven temperature higher:

1.

Press  

  for 6 seconds (Fig. 1).

2.

To increase the temperature use the number pads to enter the

desired change.  (Example 30°F)  

 

 (Fig. 2).  The

temperature may be increased as much as 35°F (19°C).

Fig. 1

Fig. 2

Summary of Contents for PLEFZ398GC









































Reviews: