5
Changing the opening direction of the door
Unplug the freezer before performing the following
operations:
Remove the ventilation grill (D-Fig. 2).
Unscrew the bottom hinge (E-Fig. 2).
Remove the door from the upper pivot (A-Fig. 3).
Remove the pivot and the washer (A+B-Fig. 3)
from the upper hinge (C), then mount these on the
opposite side.
Re-assemble the door.
Screw down the bottom hinge (E-Fig. 2) on the
opposite side by using the screws previously
removed.
Remove the plug (F-Fig. 2) from the ventilation
grill (D) and introduce it into the seat left free on
the opposite side.
Re-assemble the ventilation grill.
Reverse the direction of the handle.
The unused opening direction is concealed by plastic
plugs. Therefore, these plugs are to be mounted on
the holes left free.
Reversing the quick-freezing compartment door
(Fig. 4)
Unscrew the closing prong support (A).
Unscrew the two hinges (B) and remove the door.
Turn the closing prong support and fix it to the
other side of the quick-freezing compartment.
Reverse the door and the hinges and mount them on
the other side of the compartment.
Check to see that the door closes correctly.
Fig. 2
Fig. 3
Fig. 4
F
F
F
F
D
E
D432
C
B
A
D173
D180
A
B
