27
CARE AND CLEANING
26
CARE AND CLEANING
•
Lay the oven door with the outer side facing
downwards on something soft and flat (for example
a blanket on a kitchen table) to prevent scratches.
Removing oven door top trim
• Take hold of the grid embossed sections of the door
trim at each end and press inwards to release the
clips. Remove the door trim by pulling it towards you.
Removing the door glass panels
WARNING
CAUTION
Rough handling, especially around the edges can cause
the glass to break.
• Lift the black bordered glass panel out of the
guide and place on something soft and flat to
prevent scratches.
•
Repeat this for the smaller clear glass panel
(when fitted).
Cleaning the door glass panels
WARNING
CAUTION
Do not to use harsh abrasives on the glass panes as the
reflective surface plays a role in the function of the oven.
Do not place glass in dishwasher. Hand wash only with a
soft cloth and warm soapy water. When dry polish with a
soft cloth and ensure the glass is dry before reassembly.
Removing bottom trim (on selected models)
• The bottom trim may be removed for cleaning by
snapping out and lifting away from the glass.
Re-assembling the bottom trim
(on selected models)
• Push down to “snap” each side of bottom trim back
into door columns.
Re-assembling the door glass panels
• Insert the smaller clear glass panel (when fitted) first
from above and at an angle to the profile of the door.
CARE AND CLEANING (CONTINUED)
•
Repeat for the black bordered glass panel ensuring
the painted surface is facing to the downside.
Re-assembling the top door trim
• Take hold of the top door trim at each side and
position it to the inside edge of the glass.
• Push the trim down with its top edge over glass panel
until the clip snaps in on each side of the trim.
•
Push the middle of the trim down to ensure it is
straight and firm against the glass panel.
