Frigidaire FRS095YC1, Instruction Manual

Page: 23 / 28

The AIR DIRECTION and SWING buttons
will be disabled when the air conditioner
is not in operation (including when the
TIMER ON is set).
Do not operate the air conditioner for
long periods with the air flow direction set
downward in cooling or dry mode.
Otherwise, condensation may occur on
the surface of the horizontal louver
causing moisture to drop on to the floor
or on furnishings.
Do not move the horizontal louver
manually. Always use the AIR DIRECTION
or SWING button. If you move this louver
manually, it may malfunction during
operation. If the louver malfunctions, stop
the airconditioner once and restart it.
When the air conditioner is started
immediately after it was stopped, the
horizontal louver might not move for
approximately 10 seconds.
Open angle of the horizontal louver
should not be set too small, as COOLING
or HEATING performance may be
impaired due to too restricted air flow
area.
Do not operate unit with horizontal louver
in closed position.
When the air conditioner is connected to
power (initial power), the horizontal louver
may generate a sound for 10 seconds,
this is a normal operation.
43 44
How to use the indoor unit
Adjusting air flow direction
Adjust the air flow direction properly
otherwise, it might cause discomfort
or cause uneven room temperatures.
Adjust the horizontal louver using the
remote controller. Adjust the vertical
louver manually.
Adjusting the vertical air flow
direction (up - down)
The air conditioner automatically
adjusts the vertical air flow direction in
accordance with the operating mode.
To set the horizontal air flow
direction (left/ right)
Adjust the vertical louver manually
using the lever on the left or right side
of the vertical louver arm (Depending
on model). Take care not to catch
fingers on the fan, horizontal louver or
to damage vertical louvers. When the
air conditioner is in operation and the
horizontal louver is in a specific
position, move the lever at left (or
right, depending on model) end of the
air outlet to the desired position.
To automatically swing the air flow
direction (up/down)
Perform this function while the air
conditioner is in operation.
Press the SWING button on the
remote controller.
To stop the function, press the
SWING button again.
Press AIR DIRECTION button to lock
louver in desired position.
Lever