Frigidaire FNGN90JGYS, User Manual

Page: 32 / 40

PROBLEM POSSIBLE CAUSE REMEDY
The burners do not work. There is no gas supply. Check the gas connection.
The appliance makes noises. Some metal parts of the ap-
pliance expand and contract
when they heat up or cool
down. The noises are nor-
mal.
The flame colour is orange
or yellow.
The flame can look orange
or yellow in some areas of
the burner. This is normal.
The oven does not heat up. The oven is deactivated. Activate the oven.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are
not set.
Make sure that the settings
are correct.
Turnspits do not rotate. There is too much food on
the spits.
Check the maximum weight
per each spit. Refer to
"Oven - Hints and tips"
chapter, Cooking tables.
Turnspits do not rotate. Connection spit is not instal-
led properly.
Make sure that the shelf is
pushed till the end and the
connection spit is not pro-
truding from its hole.
It takes too long to cook the
dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
The display shows an error
code that is not in this ta-
ble.
There is an electrical fault. Deactivate the oven with the
house fuse or the safety
switch in the fuse box and
activate it again.
If the display shows the er-
ror code again, contact the
Customer Care Department.
The display shows "12.00". There was a power cut. Reset the clock.
32
TROUBLESHOOTING