background image

This appliance is suitable for the following
markets: 

BH KW OM QA AE

Installation

 WARNING!

Only a qualified person must install

this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction supplied

with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the handle.

• The kitchen cabinet and the recess must

have suitable dimensions.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is installed

below and adjacent safe structures.

• Parts of the appliance carry current.

Close the appliance with furniture to

prevent touching the dangerous parts.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

• Do not install the appliance on a

platform.

• Do not install the appliance adjacent to a

door or under a window. This prevents

hot cookware to fall from the appliance

when the door or the window is opened.

• Make sure to install a stabilizing means

in order to prevent tipping of the

appliance. Refer to Installation chapter.

Electrical Connection

 WARNING!

Risk of fire and electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information

on the rating plate agrees with the power

supply. If not, contact an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Do not let mains cables touch or come

near the appliance door, especially when

the door is hot.

• The shock protection of live and

insulated parts must be fastened in such

a way that it cannot be removed without

tools.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you

disconnect the appliance from the mains

at all poles. The isolation device must

have a contact opening width of

minimum 3 mm.

• Fully close the appliance door, before

you connect the mains plug to the mains

socket.

Gas connection

• All gas connections should be made by

a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the

adjustment of the appliance are

compatible.

• Make sure that there is air circulation

around the appliance.

4

SAFETY INSTRUCTIONS

Summary of Contents for FNFG60JGR









































Reviews: