3. Install the warming rack (S) on the
top of grill housing.
Step 16
1. Place a gas cylinder (not included)
into the cabinet assembly.
2. Put the hose through the hose
bracket and connect the cylinder
with the gas hose regulator as
shown.
3. Rotate the steel wire to secure the
gas cylinder as shown.
Operation instruction
Connecting gas cylinder
The propane gas supply cylinder to be
used must be constructed and
marked in accordance with the
Specifications for propane gas
cylinders of your local authorities.
Only cylinders with a listed overfill
prevention device (OPD) and marked
"propane" may be used. Cylinders
with an OPD will have valve handles
with three "lobes" (prongs). Use only
20-pound cylinders (Height 18.11”,
Diameter Tank 9.84”, Diameter foot:
8.03”) equipped with a cylinder
connection device compatible with
the connection for outdoor cooking
appliances. The cylinder must include
a collar to protect the cylinder valve.
The gas cylinder should not be
dropped or handled roughly! If the
appliance is not in use, the gas
cylinder must be disconnected.
Storage of an appliance indoors is
permissible ONLY if the cylinder is
disconnected and removed from the
appliance. Cylinders must be stored
outdoors out of the reach of children
and must not be stored in a building,
garage or any other enclosed area.
Your cylinder must never be stored
where temperatures can reach over
125°F. Before connection, be sure that
there is no debris caught in the head
of the gas cylinder, head of the
regulator valve or in the head of the
burner and burner ports.
Connect regulator valve and hand-
tighten firmly. Disconnect the propane
Only use the regulator provided!
If a replacement is necessary, please
call our customer service center. Do
not use replacement parts that are not
intended for this grill.
The cylinder valve always has to be
above the horizontal position, for the
cylinder to have vapor withdrawal only.
R
E
N
G
E
N
G
51
52
Attention
