Step 4
Insert the steel wire (F) into the hole on
the back cabinet bottom cabinet panel
(C) using one screw (BB). panel (D)
and place the wire on
Step 5
Insert the door handle (H) to the door
assembly (G) (I) using four screws
(AA).
Step 6
1. Insert the pin on the bottom of the
left door assembly into the hole on
the left bottom side of the cabinet
assembly.
2. Push down the pin on the top of
the left door assembly and insert
into the hole on the left side of the
cabinet front beam.
3. Repeat the same procedure for the
right door assembly.
4. Install the tool hook (T) into the left
door.
Step 7
1. Install the drip pan assembly (N) to
the bottom body assembly, using
four screws (CC) and four flat
washers (GG).
Hardware used
x 4
Screw
M6 x 12
AA
Hardware used
BB
x 1
Screw
M5 x 8
G
H
AA
I
H
AA
BB
N
T
E
N
G
E
N
G
43
44
