manualshive.com logo in svg

Frigidaire FGHC2331PFCA, Use & Care Manual, Page: 24 / 39

Share
Download
Frigidaire FGHC2331PFCA Use & Care Manual Download Page 24

24

Ice maker/dispenser tips

•  If your refrigerator is not connected to a 

water supply or the water supply is turned 

off, turn off the ice maker as described in 

the previous section.

•  The following sounds are normal when the 

ice maker is operating:

 

-  Motor running

 

-  Ice dropping into ice bin

 

-  Water valve opening or closing

 

-  Running water

•  When dispensing ice, you will hear a 

snapping or clicking sound when the ice 

chute opens and closes.

• 

If you need a large quantity of ice at one 

time, it is best to get cubes directly from 

the ice bin.

•  Ice cubes stored too long may develop an 

odd flavor. Empty the ice bin as explained 

below.

•  When dispensing cubed ice, it is normal to 

have a small quantity of little pieces along 

with the whole cubes.

•  To avoid splashing, dispense ice into your 

container before adding liquids.

• 

It is normal for ice to fill to the top of the 

ice bin.

IMPORTANT

Your ice maker is turned on at the factory 

so it can work as soon as you install your 

refrigerator. If you cannot connect a water 

supply, set the ice maker’s On/Off feature 

to Off; otherwise, the ice maker’s fill valve 

may make a loud chattering noise when it 

attempts to operate without water.

IMPORTANT

On occasion, unusually small ice cubes may 

be noticed in the bucket or in dispensed ice. 

This could occur in normal operation of the 

ice maker. If you start seeing these more 

frequently, it may be an indication of low 

water pressure or the water filter needs to be 

replaced. As the water filter nears the end of its 

useful life and becomes clogged with particles, 

less water is delivered to the ice maker during 

each cycle. Remember, if it’s been six months 

or longer since you last changed your water 

filter, replace the water filter with a new one. 

Poor quality household water may require the 

filter to be changed more frequently.

Using the ice maker after 

installation

Before making ice for the first time, be sure 

to prime the water supply system. Air in new 

plumbing lines can result in two or three empty 

ice maker cycles. Furthermore, if the system 

is not flushed, the first ice cubes may be 

discolored or have an odd flavor.

AUTOMATIC ICE & WATER DISPENSER

FRIGIDAIRE PROFESSIONAL

CAUTION

If the water supply to your refrigerator is 

softened, be sure the softener is properly 

maintained. Chemicals from a water softener 

can damage the ice maker.

Summary of Contents for FGHC2331PFCA








































Reviews:

No comments