background image

8

OPTIONAL FEATURES

NOTE

While in Sabbath mode, neither the lights nor the control panel will work until Sabbath mode has 

been deactivated.

The unit stays in Sabbath mode after a power failure recovery.  It must be deactivated with the 

buttons on the control panel.

Adjustable Shelf  

(some upright models)

This shelf can be moved to 1 or 2 positions. Lift the shelf up and out to move to the desired location.

Power Off

To shut cooling off to the unit and to turn off the interior lights of the unit, enter into the options menu 

on the control panel and press and hold the “set” button for 3 seconds once the indicator is highlighted 

next to “power off”. “Power off” will be displayed on the control panel to indicate that the unit is in 

the powered off mode. To turn power back on to the unit, press and hold the “set” key for 3 seconds. 

Then the power off indicator will be removed from the control panel and the set point of the unit will be 

displayed again.

Power Fail

If your unit has lost power, the control panel will display “power fail” and the number of hours 

that your unit has been without power up to a maximum of 48 hrs. The alarm will sound until the 

condition is acknowledged by pressing the set button or any other button on the control panel.

Power On Light

The Power On Light indicates that the appliance is properly connected to electrical power. The light glows 

even when the temperature control is turned to OFF. If the light goes out, refer to “Appliance does not 

run” in the 

Before You Call

 section.

Door Ajar

If your door has been left open for more 5 minutes, the control panel will display “door ajar” and 

will sound an alarm until the door has been closed or any button is pressed on the control panel. If 

a button on the control panel has been pressed but the door has not been closed, “door ajar” will 

continue to be displayed on the control panel until the door has been closed.  

Sabbath Mode

The Sabbath mode is a feature that disables portions of the appliance and its controls in accordance 

with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community.  
To turn Sabbath mode on, press and hold the “Options” button and “+” button for 5 seconds, after 

which “Sb” will be displayed on the control panel indicating that the unit is in Sabbath mode. To exit 

Sabbath mode, press and hold the “Options” button and “+” button for 5 seconds, after which the 

display will return to displaying the set point of the unit.
In the Sabbath mode, the High Temp alarm is active for health reasons.  If a high temperature alarm 

is activated during this time, for example, due to a door left ajar, the alarm will sound for about 10 

minutes.  The alarm will then silence on its own and a “high temp” icon will be displayed on the 

control panel.  The high temp icon will continue to display even if the door is closed until Sabbath 

mode is exited and the icon reset.

For further assistance, guidelines of proper usage and a complete list of models with the 

Sabbath feature, please visit the web at http:\\www.star-k.org.

Summary of Contents for FFFC16M5QW

















Reviews: