background image

11

SETTING OVEN CONTROLS

Setting the minute timer

1. Press 

 timer on-off

.

2. Press the

to increase the time in one minute

increments. Press and hold the 

to increase the

time in 10 minute increments. The timer can be set for

any amount of time from 1 minute to 11 hours and 59

minutes.

Note:

 If the

pad is pressed first, the timer will

advance to 11 hours and 59 minutes.

3. When the set time has run out, the timer will sound a 3

second tone . 0:00 will show in the display until 

timer

on-off 

is pressed.

To change the timer while it is in use

While the timer is active and shows in the display, press

and hold the 

 or 

 to increase or decrease the time

remaining.

To cancel the minute timer before the set time has

run out

Press 

timer on-off 

once .

NOTES

The minute timer 

will not

 start or stop the cooking

process. It serves as an extra timer in the kitchen that

will beep when the set time has run out. The minute

timer can be used alone or while using any of the other

oven features.

If another feature is active when the minute timer is

active, the minute timer will show in the display. To

view information about other active features, press the

pad for that feature.

Setting bake

The oven can be programmed to bake at any temperature

from 170°F to 550°F (77°C to 287°C).  The factory preset

bake temperature is 350°F (177°C).

To set bake

1. Press 

bake

. "— — —" appears in the display.

2. Within 5 seconds, press the 

or 

. The display

will show "350°F (177°C)." By pressing and holding

the

or 

, the temperature can then be adjusted

in 5°F increments (1°C if the control is set to display

Celsius).

3. As soon as the

or 

 pad is released, the oven

will begin preheating to the selected temperature.

When the oven reaches the desired baking

temperature, the control will beep once.

To change the oven temperature after bake has

started

1. Press 

bake

.  Visually check the bake temperature and

that it needs to be changed.

2. Press the

or

 pad to increase or decrease the

set temperature to the desired new oven temperature.

NOTE

To cancel baking at any time, press

 clear off

.

Dark or dull pans absorb more heat than shiny bakeware

resulting in dark or overbrowning of foods. It may be

necessary to reduce the oven temperature or cook time

to prevent overbrowning of some foods. Dark pans are

recommended for pies. Shiny pans are recommended

for cakes, cookies and muffins.

IMPORTANT

Summary of Contents for FFEF3011L W





















Reviews: