background image

8

Adjusting Oven Temperature

Note:

 The oven temperature

adjustments made with this
feature will not change the Self-
Clean cycle temperature or the
Broil temperature .

The temperature in the oven has been preset at the factory. When first using the oven,
be sure to follow recipe times and temperatures. If you think the oven is too hot or too
cool, the temperature in the oven can be adjusted. Before adjusting, test a recipe by
using a temperature setting that is higher or lower than the recommended temperature.

The baking results should help you to decide how much of an adjustment is needed.

To adjust the oven temperature:

1.

Press and hold 

BAKE

 pad for 6 seconds. The preset adjustment number will appear and 

"UPPER"

 will flash in the

display.

2.

To increase the temperature use the 

UP ARROW

 pad to enter the desired change. The temperature may be

increased as much as 35°F (19°C). To decrease the temperature use the 

DOWN ARROW

 pad to enter the desired

change. The temperature may be decreased  as much as 35°F (19°C).

3.

Press 

START

 pad or wait 5 seconds to accept the temperature change and the display will return to the time of day.

Press 

CLEAR/OFF

 pad to reject the change if necessary.

Versión en español

Si desea obtener una copia en español de este Manual del Usuario, sírvase escribir a
la dirección que se incluye a continuación. Solicite la P/N 

318200137E

.

Spanish Owner's Guides
Frigidaire Company
P. O. Box 9061
Dublin, Ohio  43017-0961

Summary of Contents for FEB27T7FC - 27" Electric Double Wall Oven









Reviews: