5
Setting Oven Controls
(continued)
Setting the Keep Warm Feature
The
Keep Warm
pad turns ON the Keep Warm feature and will maintain an oven temperature of 170°F (77°C). The Keep
Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the
Keep Warm feature will shut the oven OFF. The Keep Warm feature may be used without any other cooking operations or
can be used after cooking has finished using BAKE, CONVECTION BAKE or CONVECTION ROAST.
The Keep Warm feature may be used with TIMED BAKE if you wish to have the Keep Warm feature turn ON
automatically when cooking has finished. The Timed Bake features require you to set the amount of cooking time. With
this information the control can calculate the time when cooking will complete and can then start the Keep Warm feature
automatically.
To set Keep Warm
1.
Arrange interior oven racks and place food in oven.
2.
Press
KEEP WARM
pad.
"
UPPER
", "
WARM
" will flash and "
HLd
" will appear in the display.
Note: If no pad is touched within 25 seconds the request to turn ON Keep Warm feature will be cancelled.
3.
Press
START
pad. "
UPPER
", "
WARM
" will stop flashing, "
HLd
" will remain on and the oven icon will appear in the
display.
4.
To turn the Keep Warm OFF at any time press
CLEAR/OFF
pad.
Note
: The Keep Warm feature will automatically turn OFF after 3 hours.
To set Keep Warm to turn ON automatically
1.
Arrange interior oven racks and place food in oven. Set the oven properly for
Timed Bake or Delayed Timed Bake
.
2.
Press
KEEP WARM
pad. "
UPPER
" and "
WARM
" will flash and "
HLd
" will appear in the display.
Note: If no pad is touched within 25 seconds the request to turn ON the Keep Warm feature and all functions
previously programmed will be cleared.
3.
Press
START
pad. "
UPPER
" and "
WARM
" will stop flashing and remain in the display. Also temperature programmed
will appear in the display.
4.
When the Time Bake has finished, the keep warm mode will turn ON automatically. The desired temperature,
"
BAKE
" and "
TIMED
" will disappear. "
HLd
" will appear. "
UPPER
" and the oven icon will remain in the display.
Note
: The Keep Warm feature will automatically turn OFF after 3 hours.
Pressing
CLEAR/OFF
pad at any time will stop all oven baking operations.
Setting Broil
The
BROIL
pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even coverage.
The broil pan and broil pan insert used together allow dripping grease to drain and be kept away from the high heat of the
oven broiler.
DO NOT
use the broil pan without the insert (Fig. 2).
DO NOT cover the broil pan insert with foil.
The
exposed grease could catch fire.
Should an oven fire occur, leave the oven door closed and turn off the oven. If the fire continues, throw
baking soda on the fire or use a fire extinguisher.
DO NOT
put water or flour on the fire. Flour may be explosive and water
can cause a grease fire to spread and cause personal injury.
Fig. 2
Broil Stop Position
Fig. 1
To set the oven to broil:
1.
Place the broiler pan insert on the broiler pan. Then place the food on the broiler pan
insert.
DO NOT
use the broiler pan without the insert.
DO NOT
cover the broiler insert
with foil. The exposed grease could ignite.
2.
Arrange the interior oven rack and place the broiler pan on the rack. Be sure to center
the broiler pan directly under the broiler element.
Make sure the oven door is in the
broil stop position
(Fig. 1).
3.
Press
BROIL
pad. "
---
" will appear and "
UPPER
" and "
BROIL
" will flash in the display.
4.
Press
UP
or
DOWN ARROW
until the desired broiling temperature appears in the
display.
5.
Press
START
pad or wait 5 seconds. "
UPPER
" and "
BROIL
" will stop flashing and the
oven icon will appear in the display. The oven will begin to broil. The desired
temperature will stay in the display.
6.
Broil on one side until food is browned; turn and cook on the second side. Season and
serve.
Note:
Always pull the rack out to the stop position before turning or removing
food.
7.
To cancel broiling press
CLEAR/OFF
pad.
