2
Setting the Clock
The
CLOCK
pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has
been preset at the factory for the 12 hour operation. When the wall oven is first plugged in, or when the power supply to
the appliance has been interrupted, the timer in the display will flash along with
"PF"
(power failure).
When
PF
appears in the display and 12:00 is flashing, press
CLEAR OFF
pad. A beep will sound and PF will disappear.
To set the clock
1.
Press
CLOCK
pad.
"CLO"
and the current time of day will appear in the display.
2.
Press
UP
or
DOWN ARROW
pad to set the correct time of day. Press
START
pad. The new time of day will appear
in the display.
Changing Between 12 or 24 Hour Time of Day Display
1.
Press and hold
CLOCK
pad for 7 seconds.
"CLO"
and the current time of day will appear in the display. A beep will
sound and
"12h"
or
"24h"
will appear in the display.
2.
Press
CLEAN
pad to switch between the 12 and 24 hour time of day display. The display will show either
"12h"
or
"24h"
.
3.
Press
START
pad or wait 5 seconds to accept the change. Press
CLEAR/OFF
pad to reject the change.
4.
Reset the correct time as described in
To set the Clock
above. Please note that if the 24 hour time of day mode
was chosen, the clock will now display time from 0:00 through 23:59 hours.
Setting Continuous Bake or 12 Hour Energy Saving
The
TIMER ON/OFF
and
CLEAN
pads control the Continuous Bake or 12 Hour Energy Saving Features. The oven
control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on
for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
To set the control for Continuous Bake or 12 Hour Energy Saving Features
1.
Press and hold
TIMER ON/OFF
pad for 10 seconds. After 10 seconds "
12h
" or "
- -h
" will appear in the display and
the control will beep once.
2.
Press
CLEAN
pad to switch between the 12 Hour Energy Saving and continuous bake features. Note: "
12h
" in the
display indicates the control is set for the 12 Hour Energy Saving mode and
"- -h"
indicates the control is set for the
Continuous Bake feature.
3.
Press
START
pad or wait 5 seconds to accept the change (display will return to time of day). Press
CLEAR/OFF
pad to
reject the change.
Setting Timer
The
TIMER ON/OFF
pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep
when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the other
oven control functions, except during a self clean operation.
To set the Timer
1.
Press
TIMER ON/OFF
pad. "
--:--
" will appear and "
TIMER
" will flash in the display.
2.
Press
UP
or
DOWN ARROW
pad to set the desired time in the display. Press
START
pad or wait 5 seconds. The
time will begin to countdown with the set time and "
TIMER
" will stay in the display. Note: If
START
pad is not
pressed the timer will return to the time of day after 25 seconds.
3.
When the set time has run out, "
End
" and "
TIMER
" will show in the display. The clock will sound with 3 beeps every
7 seconds until
TIMER ON/OFF
pad is pressed.
To cancel the Kitchen Timer before the set time has run out:
Press
TIMER ON/OFF
pad. The display will return to
the time of day.
Setting Oven Lockout Feature
The
CLEAR/OFF
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven doors
and prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The
ovens can be locked individually.
To activate the Oven Lockout feature
1.
Press and hold
CLEAR/OFF
pad for 3 seconds.
2.
After 3 seconds a beep will sound, "
DOOR
", "
LOCKED
" will flash and "
Loc
", the oven icon, "
UPPER
" and
will
appear in the display. Once the oven door is locked the "
DOOR
" and "
LOCKED
" indicator will stop flashing and
remain in the display.
To reactivate normal oven operation:
1.
Press and hold
CLEAR/OFF
pad for 3 seconds. A beep will sound. The oven icon, "
UPPER
" "
LOC
" and
will disappear
from the display. "
DOOR
" and "
LOCKED
" will flash in the display until the oven door has completely unlocked.
2.
The wall oven is again fully operational.
Note: Because you can set the oven lockout individually, the lower oven can be used when the upper oven lockout
feature is on.
